What are the cutting devices for ribbon?

　　Ribbon cutting equipment, ribbon is widely used, shoelace factory, on the ribbon processing equipment also requires a high degree of automation, beautiful effect requirements, the traditional ribbon cutting is the use of cold shear, hot shear principle, shear effect is rough, loose, cut is not flat or yellow, brown. In order to improve this situation, cotton woven belt, using the principle of ultrasonic shear ribbon, you can achieve automatic shear, ultrasonic sealing, not yellowing, coking, to achieve the desired effect. The main equipment for ribbon cutting is: automatic ribbon cutting machine, automatic ribbon punching shears, semi-automatic ribbon shears, which use the principle of ultrasonic wave to complete the cutting of the ribbon.

　　There are two ways to cut ribbon: one is by hand and the other is by machine. Generally, manual operation adopts the method of heating wire and hot cutting or guillotine cutting. The two kinds of tape cutting process equipment are put in at a low cost, but the labor cost is very high. In addition, when heating wire is used for cutting, a lot of smoke will be generated. And will leave scorched marks on the cutting surface of the ribbon. Guillotine cut through without smoke and scorched marks. But can not effectively seal will appear loose mouth (that is, must edge) phenomenon.

　　Take advantage of the cutting of automatic strip cutting machine: the strip cutting machine is divided into hot strip cutting machine, cold strip cutting machine and ultrasonic strip cutting machine.

　　Using the cutting of automatic strip cutting machine: the strip cutting machine is divided into hot strip cutting machine, cold strip cutting machine and ultrasonic strip cutting machine. Working principle:

　　Automatic ribbon cutting machine is the use of ultrasonic welding technology combined with traditional shear, working in the ultrasonic generator, ultrasonic energy through ultrasonic transducer to the welding head and violent vibration friction with the cutting die, so as to achieve the effect of shear and the shear product is more beautiful, stronger, more efficient and fast efficiency.

　　Automatic tape punching shears use ultrasonic vibration friction instant heat energy principle, mold or cutter in the cylinder pressure contact ultrasonic vibration surface, so as to achieve the effect of cutting or welding or perforation. Automatic sealing of cutting or punching edge, no blackening, no burning, no hardening, no loose edge, comfortable to the touch, excellent sealing effect.

　　The above is for you to summarize the introduction of the tape cutting equipment, I hope to help you.